New Fashion Design for Transition Contact Lenses - Eyescontactlens Marble collection yearly natural color contact lenses – EYESCONTACTLENS

Advantage

Product Details

The base color lenses add radioactive lines to make the color blend with their pupils more naturally. Let the eyes keep their beauty. In addition to its large diameter, there is also a black ring design on the outer ring, which not only makes the pupil and the color of the color lens blend more naturally, but also enlarges the pupil and enlarges your color. The choice of 5 colors can meet your color selection needs. 38%-42% water content, so that the eyes will not dry out with the increase of wearing time. The lens is made of HEMA+NVP material, which minimizes the adhesion of ocular protein to the lens, thereby reducing the sensation of foreign body in the eye. The sandwich lens technology puts the colored layer in the middle of the two layers of contact lenses to prevent the color from contaminating the eyeball, so that it can not only greatly meet your beauty needs, but also provide the greatest degree of safety for your eyes. Protect. In addition to the basic functions, our color contact lenses also have the function of sunscreening the pupils of the eyes, bounce the UV rays in the sun, and play an additional function of protecting the eyes, thereby protecting our eyes from the ultraviolet rays in the sun. Infringement, to maintain the youth of the eyes, this is also a function that is ignored by many of us. Regardless of the color of the pupil and the color of life, it is not easily defined. This is the way we should have a life. Choose us and have a personal life.

Advantage

The lens adopts non-ionic (HEMA+NVP), which is based on HEMA by adding NVP ingredients to make the lens very light, thin, and soft, and not suitable for protein precipitation.
The water content of the lens is 38%-42%, which is a low water content lens. The lens with low water content has relatively high hardness and will not be deformed when worn for a long time. Moreover, the moisture in the lens is not easy to lose, and it is not easy for the eyes. Dry, suitable for most people to wear for a long time.
The lens technology uses the “sandwich” technology, which puts a layer of colorful and colored pigments between two transparent corneal contact sheets to protect our eyes.
With our own factory and pupil color designer, we support a certain number of custom designs, not limited to the range of choices we provide, and can best meet your design and production needs.

FAQ

1.How to put in contact lens?

Step 1: Take the lens out from the packet gently after washing and drying your hands.Then make sure you are holding the correct side of the lens.

Step 2: Hold up your upper eyelid and pull down your lower lid.then use the index finger to gently place the lens.

Step 3: Look up and down. left and right after putting the lens in so that it will settle into place. then close your eye in a while.

Step 4: Do again for the other eye through simple steps.

2.How to remove contact lens?

Step 1: Wash and dry your hands thoroughly before touching your eyes.

Step 2:Use your clean hand to gently pull down your lower eyelid. then pull up your upper eyelid.

Step 3:Using your index finger and thumb to pinch the lens gently.

Step 4:Look up and slide the lens down gently so that the lens will be kept in your eye. then pinch it off onto finger. Do it again for the other eye.